-40%
1/2 in. (.700 O.D.) x 500 ft. Poly Drip Irrigation Tubing

1/2 in. (.700 O.D.) x 500 ft. Poly Drip Irrigation Tubing

$ 21.63

Availability: 100 in stock
  • Item Height: 2 in
  • Maximum Working Pressure: 60 psi
  • Condition: New
  • Item Length: 2 in
  • Item Diameter: 2 in
  • Installation Area: Garden (above ground)
  • Type: Drip Tubing/Drip Irrigation Line
  • Suitable For: Plant Pots/Flower Pots
  • Material: Polyethylene
  • All returns accepted: ReturnsNotAccepted
  • Item Width: 2 in
  • Brand: DIG
  • Color: Black

    Description

    Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected
    Designed to meet the demand of any drip irrigation projects from professional landscape to residential gardening installations, for above or below the ground
    Resistant to cracking, heat, UV rays and chemicals
    Produced using dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
    Use with DIG's 0.700 compression fittings, color black, and Nut Lock fittings
    Dimensions: 500 ft. with .600 ID x .700 OD
    Bending radius: 1 ft.
    Maximum operating pressure: 60 psi
    Can be installed above or below ground
    DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
    Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)