1 Unit 3"x3" Aluminum Angle Bracket Heavy Duty 0.25"T 6061 #10 bore/0.1875

Description

Important: Please use links at the bottom of the description to purchase larger quantities to reduce costs if you just want to follow the standard guidelines for discounts.
This is for 1 unit, 3"x3" Aluminum Angle Bracket Heavy Duty 0.25 Thickness 6061 #10 bore/0.1875"x4x2. Condition is "New". Shipped with USPS Priority Mail. Yes, all products will be shipped in a single package to reduce shipping costs, and will always be shipped as cheaply as possible, unless specified. Each bracket is 0.420 pounds, or 190.5 grams.
These brackets will support up to 720LBs gross stress weight if properly supported. Rack shelving, provided the support material meets the specified requirements for rack storage, can support up to 2,880 pounds at the center. Another example, a single bracket will support 90 pounds at 2 feet, or 180 at 1 foot, provided the support material can carry the weight without being damaged or over-flexing. Brackets have been stress tested to 1,440 pounds without permanent deformation or destruction. It is highly recommended for your safety that you do not exceed the recommended maximum support weight of 720LBs per bracket.
I have placed this item so you can order them and see the quality for yourself, or maybe you just have a special use scenario where you only need one.
General use scenarios are, shelving, rack storage, furniture construction, cabinetry, anchoring equipment to concrete, structural brackets for sheds, general structural, etc. Please note this is 6061 Aluminum, this can be used both indoors and outdoors.
Mill hole spacing is 1.25 inches distance width-wise, and 1.5 inches depth-wise. Direction can be flipped. Custom machining options are currently available free on request: .25 inch diameter holes, .3125 diameter holes. Currently variable spacing is not available due to tool setup, unless you have a substantial order to request.
Cosmetic units are available upon request. Unfortunately due to the delicate nature of aluminum, scratches are extremely common from material chips while processing. All units will be packaged neatly together with paper separating them to prevent additional contact.
These brackets are all manufactured to order. If you have any questions feel free to contact me directly. I can supply up to 20,000 of these units per month. You may contact me directly regarding bulk discounts.
Manufactured in USA.
Due to the way E-bay handles shipping costs (Linear, no logarithmic price curves like normal shipping), I had to make other posts in order to market these appropriately.
Please use the links provided below to purchase higher quantities with better prices:
Buy in bulk to save more:
4 Units -
https://www.ebay.com/itm/324521663124
8 Units - https://www.ebay.com/itm/324521662784
20 Units - https://www.ebay.com/itm/324521663419
100 units -  https://www.ebay.com/itm/324600392034