25 psi Pressure Reducer Regulator 3/4 inch Hose Thread Drip Irrigation System

Description

This heavy duty 20-30 psi lead-free brass regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired.  Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA and Canada.
Maintains water pressure between 20-30 psi (25 psi nominal).  0-6.0 GPM (gallons per minute) flowrate.  Maximum Inlet Pressure:  160 psi.
Inlet Size:  ¾" FHT (female hose thread).  Outlet Size:  ¾" MHT (male hose thread).  Connects to a standard hose bib or garden hose in USA and Canada.
It may be connected to an automated timer, backflow preventer, or filter, if desired.
The regulator body is made of solid lead-free brass which contains less than 0.25% lead.
Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator.  It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.
Note: Some garden hoses are made with aluminum fittings.  To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time.
The video below shows a test that was performed on the pressure regulator.  At low or zero flowrate, the outlet pressure is maintained between 20-30 psi.  The outlet pressure may drop below 20 psi when the flowrate is high.
25 psi Lead Free Brass Pressure Regulator by Vibrant Yard Co  LLC
Video will open in a new window
Using the mobile app? Copy this link into your browser: