3-3/4" Angle Dripper Pot Stakes for Multi-Outlet Emitters Irrigation (QTY 25)

Description

3-3/4" Angle MOD Pot Dripper Stakes
(sold in packs of 25)
EDAA-01MODS-A-ANGS-B
FOR 0.125" ID TUBING
MOD = Multiple Outlet Dripper
Drippers/emitters & accessories are available on a separate listing in our store
Specs:
Stakes are used to hold tubing into pots and help regulate the flow to keep high uniformity from the dripper.
Use with the MOD assemblies for Netafim Jr nipple outlet emitters/drippers or Toro NGE nipple outlet emitters/drippers (press fit connection when used with the MOD adapters).
Large flow path - less susceptible to plugging.
Uses Poly Vinyl micro tubing available in rolls or pre-cut lengths to attach from MOD's to drip stakes (0.125" ID tubing).
Description:
Drip emitters and drip stakes are widley used in the greenhouse/nursery, agriculture, vineyard, and landscape systems to increase yield and uniformity while decreasing run off caused by over watering. These are great for use in pots and nursery stock when used with 1/8" (187x125) micro transfer tubing. It is recommended to use at least 120 mesh filtration and a minimum of 7 psi. Use the single, 2 or 4-way adapters for pot watering with one emitter and the pot stakes to hold the tubing in the media.  Contact us if you do not see the accessory you are searching for.
Contact us for more information or help with system set-up .
Thanks for visiting our Irrigation-Mart E-store.
800 SAY-RAIN