Dawn Industries HCT-COMBO, Coring Tool for 1/2" & 3/4" KwikSeal Saddles 100C

Description

Dawn Industries HCT-COMBO, Coring Tool for 1/2" & 3/4" Saddles, KwikSeal
Cuts a clean shaving free hole in seconds and removes the plug from the pipe. Fits both 1/2" and 3/4" FPT outlets
Part numbers it works with: 75C, 75D, 100C, 100D, 125C, 125D
Directions:
2-in-1 Hole Coring Tool
With Blade Retracted, Insert Coring Tool into the female outlet.
When the tool is well seated in the outlet, push hard straight down on the handle until you feel the blade penetrate through the pipe. With continuing down pressure on the handle, turn the tool clockwise at least one full turn.
Maintain the downward pressure on the handle and remove the tool from the fitting. Retract the blade by pulling the handle out to eject the core.