-40%
General Finishes Water-Based Semi-Gel Wiping Wood Stain, 17 Colors (Pint, Quart)
General Finishes Water-Based Semi-Gel Wiping Wood Stain, 17 Colors (Pint, Quart)

General Finishes Water-Based Semi-Gel Wiping Wood Stain, 17 Colors (Pint, Quart)

$ 13.46

Availability: 290 in stock
  • Brand: General Finishes
  • All returns accepted: Returns Accepted
  • Country/Region of Manufacture: United States
  • Restocking Fee: No
  • MPN: Does Not Apply
  • Bundle Listing: No
  • California Prop 65 Warning: This product contains a chemical known to the State of California to cause cancer and birth defects. Do not swallow; first aid: drink water to dilute product. May cause eye and skin irritation; first aid: flush eyes thoroughly with water. For more information, go to www.P65Warnings.ca.gov
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Condition: New
  • Item must be returned within: 30 Days

    Description

    Water Based Wood Stains have all the advantages of oil based stains: they spread easily, can be repaired, blend effortlessly and have plenty of open time. The thicker formula allows controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine and Maple.
    More Information:
    Type:
    Water-Based
    Use
    : Interior
    Ambers:
    No
    Application
    : Brush or Spray
    Application On
    : Raw Wood Only
    Spray Tip Size
    : HVLP .043 - .051 Medium Air Cap
    Can Sizes
    : Pint or Quart
    Coverage
    : 150 Sq. Feet/Quart
    Topcoat Required
    : Yes
    Topcoat Recommended
    :General Finishes High Performance Polyurethane Top Coat or General Finishes Enduro Water-Based Clear Poly Topcoat
    Dry Time to Touch
    : 30 Minutes
    Dry Time to Re-coat
    : 2 Hours
    SANDING
    : Do not sand stains before applying topcoat. On bare wood sand to 150-180 grit. For more open grained woods sand to 220 grit. COATS: 1 coat of stain is recommended - no more than two. If you apply multiple coats, add 10-20% topcoat to the stain to lock the color down. The other option when applying 2-3 coats of stain is to apply one coat of shellac before applying top coat. Allow to dry overnight then apply High Performance.