HF AUTOMATIC ANTENNA TUNER, ICOM, AT-130E

Description

HF AUTOMATIC ANTENNA TUNER, ICOM, AT-130E
ICOM AT-130E HF AUTOMATIC ANTENNA TUNER
Works perfectly. Ships from Denmark
Matches all bands
The AT-130/E matches all frequencies on the HF marine band. For example, the tuner matches a 7 m; 23 feet long-wire antenna across 1.6–30 MHz
Full automatic tuning
Just push the [TUNE] switch on the transceiver, the AT-130 immediately tunes for a minimum SWR on any frequency in the HF marine band
HF operation on any size ship
The AT-130 allows HF operation where antenna element length is restricted due to space.
Weather resistant
The AT-130 is housed in a durable, completely weather resistant acrylic case with a rubber gasket. The antenna tuner can be conveniently installed both on the deck or in the cabin near the antenna element
Simple installation
Installation is simple. Just connect the control and antenna cables and short-times internal settings. After installation, you never need to open the cover for maintenance
Preset tuning function
This function provides super fast tuning on your mostused frequency. 45 memories for shorter tuning time To decrease the tune-up time, the AT-130/E automatically stores the matching conditions for up to 45 frequencies. Retuning for a memorized frequency takes only approximately 1 second
Super capacitor for memory backup
Even if the AT-130/E is not used for approximately 1 week, the built-in super capacitor backs up the 45 memory contents. Low power tune up The AT-130/E emits low output power during tuning. This feature reduces the possibility of causing interference to other stations
Weight (approximately) AT-130 2.5 kg
Power supply requirement 13.6 V DC (supplied from the HF transceiver)
Current drain Maximum 2 A
Antenna connector SO-239 (50 O)
Maximum Input power 150 W (PEP) 100 W
Automatic tuning time Approximately 2 to 3 seconds (general condition) Maximum 15 seconds Approximately 1 second (re-tuning for a memorized frequency)
Automatic tuning accuracy SWR 2.0:1